Pilz PSS SB HYD, Basic license - Manual (Page 31)

4-1 Modular Block System: Hydraulic Presses
Intended Use
The software package “MBS Hydraulic Presses” is designed for use within
the failsafe section of the PSS-range of programmable safety systems.
INFORMATION
Use of standard function blocks outside the specifications described here
will be deemed improper use.
INFORMATION
Always use the current version of the relevant standard function block.
Please ensure you refer to the Appendix, sections entitled “Standard
function blocks: current versions” and “Changes to the standard function
blocks”.
System software
The software package “MBS Hydraulic Presses” can be used with the
following system software:
• PSS SW PG
• PSS WIN-PRO
INFORMATION
Depending on the programming language selected on PSS WIN-PRO,
designations for formal parameters and operands may differ from those
found on PSS SW PG. Any designations that are different will
automatically be replaced by PSS WIN-PRO.
Further information is available in the programming manual for “PSS SW-
PG” or “PSS WIN-PRO”.