Pilz PSS SB HYD, Basic license - Manual (Page 231)

Modular Block System: Hydraulic Presses 6-169
- Bit 04: Fault driving the muting lamps / external power source at the
feedback inputs
Remedy: Check the cabling, optocoupler and output module,
then reset
- Bit 05: I/O-Group in STOP (SafetyBUS p)
Remedy: Clarify reason for I/O-Group stop, then start I/O-
Group
• Error messages on the CPU-display
- None
Global parameters used in administration data block DB 015
• None
Blocks required
• DB015: Administration data block
DB015 must consist of its total length of 1024 data words.
DB015 must have READ/WRITE access.