Pilz PSS SB HYD, Basic license - Manual (Page 293)

9-5 Modular Block System: Hydraulic Presses
SB059: Two-hand monitoring
Version Date CRC
1.0 04.06.96 75A8
1.1 15.08.97 1174
STOP
1.2 18.02.98 7380
1.3 22.03.99 9E1C
STOP
Changes from Version 1.0 to Version 1.1
• Name changed from “2_Hand” to “2_HAND”
• Addition of input parameter Off.
This input parameter allows you to deselect two-hand monitoring or the
console.
• Addition of output parameter OFF.
This output parameter indicates whether two-hand monitoring or the
console have been deactivated.
OFF = 1: Two-hand monitoring/console correctly deselected
Changes from Version 1.1 to Version 1.2
• Fixed contact synchronisation time implemented.
• Extended monitoring on PSS start-up/reset when two-hand monitoring /
console deselected.
Changes from Version 1.2 to Version 1.3
• Introduction of input parameter KU_S
This input parameter enables you to enter a maximum contact
switchover time between the N/O and N/C contacts on pushbuttons.
• Monitoring on PSS start-up/reset when two-hand monitoring or console
is de-selected has been optimised.