Pilz PSS SB HYD, Basic license - Manual (Page 275)

8-39 Modular Block System: Hydraulic Presses
SafetyBUS p example
INFORMATION
On decentralised DI inputs, input statuses are only available to the PSS
after a group start has taken place. However, due to the inversion of the
input signal between sensor connections 3 and 4, input parameter
S1 will
show RLO = 1 and input parameter S2 RLO = 0. The inverted input
statuses will therefore need to be AND-linked to the respective group
flags.
LN E33.00 PSEN_CH1 Safety gate contact channel 1
U M116.31 SBp_IO-Group SBp Status-M I/O-Group 31
= M099.00 MPSENCH1 Flag for s/gate signal channel 1
L E33.01 PSEN_CH2 Safety gate contact channel 2
U M116.31 SBp_IO-Group SBp Status-M I/O-Group 31
= M099.01 MPSENCH2 Flag for s/gate signal channel 2
CAL SB066
SB066
ST_K4
B - SSNR
X - S1
X - S2
W - SyTi
X - MEin
X - Strt
X - ARSt
X - AuSt
X - NFkT FG - X - M070.02 KB003 -
M99.00 .MPSENCH1 -
M99.01 .MPSENCH2 -
KF03000 .Syn.Time -
M110.00 .RLO_0 -
E0.03 .Reset -
M110.00 .RLO_0 -
M110.00 .RLO_0 -
M110.01 .RLO_1 -