ADTRAN 5000 Series - Manual (Page 962)

Command Reference Guide PPP Interface Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 962
pppoe service-name
Use the pppoe service-name command to use this tag value to filter PPPoE session offers from PPPoE
servers. Use the no form of this command to return to the default setting.
Syntax Description
Specifies a service name by text string (up to 255 characters) corresponding to
the Service-Name Tags under RFC2516. This string indicates an ISP name (or a
class or quality of service)
. If this field is not specified, any service is acceptable.
Default Values
By default, no names are specified.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example defines a service type that is not to be accepted by the AOS:
(config)#interface ppp 1
(config-ppp 1)#pppoe service-name Service_Name