beautypg.com

Lease

Page 1155

background image

Command Reference Guide

DHCP Pool Command Set

61200990L1-35E

Copyright © 2005 ADTRAN

1155

lease

Use the lease command to specify the duration of the lease for an IP address assigned to a Dynamic Host
Configuration Protocol (DHCP) client. Use the no form of this command to return to the default lease
value.

Syntax Description

Specifies the duration of the IP address lease in days.

Optional. Specifies the number of hours in a lease. You may only enter a value in
the hours field if the days field is specified.

Optional. Specifies the number of minutes in a lease. You may only enter a value
in the minutes field if the days and hours fields are specified.

Default Values

By default, an IP address lease is one day.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.

Command History

Release 2.1

Command was introduced.

Usage Examples

The following example specifies a lease of 2 days:

(config)#ip dhcp-server pool MyPool

(config-dhcp)#lease 2

The following example specifies a lease of 1 hour:

(config)#ip dhcp-server pool MyPool

(config-dhcp)#lease 0 1

The following example specifies a lease of 30 minutes:

(config)#ip dhcp-server pool MyPool

(config-dhcp)#lease 0 0 30