ADTRAN 5000 Series - Manual (Page 1035)

Command Reference Guide CA Profile Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1035
ip-address
Use the ip-address command to specify an IP address to be included in the certificate requests.
Syntax Description
Defines the IP address in dotted decimal notation (e.g., 192.22.73.101).
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the IP address only
once rather than every time you go through the enrollment process. Refer to
crypto ca enroll on
page 316 .
Usage Examples
The following example specifies 66.203.52.193 as the IP address to be sent in certificate requests:
(ca-profile)#ip-address 66.203.52.193