ADTRAN 5000 Series - Manual (Page 423)

Command Reference Guide Global Configuration Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 423
logging email sender
Use the logging email sender command to specify the sender in an outgoing email message. This name
will appear in the From field of the receiver’s inbox. Use the no form of this command to disable this
feature.
Syntax Description
No subcommands.
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 6.1 Command was introduced.
Usage Examples
The following example sets a sender for outgoing messages:
(config)#logging email sender [email protected]