ADTRAN 5000 Series - Manual (Page 222)

Command Reference Guide Enable Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 222
show ip policy-class
Use the show ip policy-class command to display a list of currently configured access policies. Refer to ip
policy-class max-sessions
on page 390 for information on configuring access
policies.
Syntax Description
Optional. Displays policy class information for a specific policy class.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following is a sample output from the show ip policy-class command:
>enable
#show ip policy-class
ip policy-class max-sessions 0
Policy-class "Trusted":
0 current sessions (6000 max)
Entry 1 - allow list MatchAll