ADTRAN 5000 Series - Manual (Page 110)

Command Reference Guide Enable Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 110
debug ip dns-proxy
Use the debug ip dns-proxy command to activate debug messages associated with domain naming system
(DNS) proxy operation in the AOS. Debug messages are displayed (real time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1 Command was introduced.
Functional Notes
The debug ip dns-proxy command activates debug messages to provide information on DNS proxy
activity in the AOS. The IP DNS capability allows for DNS-based host translation (name-to-address).
Usage Examples
The following example activates debug messages associated with DNS proxy activity:
>enable
#debug ip dns-proxy