ADTRAN 5000 Series - Manual (Page 486)

Command Reference Guide Line (SSH) Interface Config Command Set
61200990L1-35E Copyright © 2005 ADTRAN 486
authorization commands [ l l default]
Use the authorization commands command to assign AAA authorization methods to lines. You must first
turn AAA on for this command to become available.
Syntax Description
Specifies a command level (1 or 15).
Applies a named authorization method to this line.
default Applies the default authorization method to a line.
Default Values
The default for this command is off.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example applies the default authorization method to line 1:
(config)#aaa on
(config)#line ssh 1
(config-ssh1)#authorization commands 1 default