ADTRAN 5000 Series - Manual (Page 21)

Command Reference Guide Basic Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 21
show clock
Use the show clock command to display the system time and date entered using the clock set command.
Refer to the section clock set
on page 78 for more information.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example displays the current time and data from the system clock:
>show clock
23:35:07 UTC Tue Aug 20 2002