ADTRAN 5000 Series - Manual (Page 685)

Command Reference Guide Demand Interface Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 685
ppp chap password
Use the ppp chap password command to configure an alternate password when the peer requires CHAP
PPP authentication. Use the no form of this command to remove a configured password. For more
information on PAP and CHAP functionality, refer to the Technology Review section for the command ppp
authentication [chap | eap | pap]
on page 680 .
Syntax Description
Specifies a password using an alphanumeric string up to 80 characters in length.
Default Values
By default, there is no defined PPP CHAP password.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1 Command was introduced.
Release 11.1 Command expanded to include the demand interface.
Usage Examples
The following example specifies a PPP CHAP password of my_password:
(config)#interface demand 1
(config-demand 1)#ppp chap password my_password