ADTRAN 5000 Series - Manual (Page 957)

Command Reference Guide PPP Interface Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 957
ppp chap hostname
Use the ppp chap hostname command to configure an alternate hostname for CHAP PPP authentication.
Use the no form of this command to remove a configured hostname. For more information on PAP and
CHAP functionality, refer to the Technology Review section for the command ppp authentication [chap |
pap]
on page 952 .
Syntax Description
Specifies a hostname using an alphanumeric string up to 80 characters in length.
Default Values
By default, there are no configured PPP CHAP hostnames.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example specifies a PPP CHAP hostname of my_host:
(config)#interface ppp 1
(config-ppp 1)#ppp chap hostname my_host