beautypg.com

Router (pim sparse) configuration command set, Router (pim sparse) configuration command set 9, Pim s – ADTRAN 5000 Series User Manual

Page 1129

background image

Command Reference Guide

Router (PIM Sparse) Configuration Command Set

61200990L1-35E

Copyright © 2005 ADTRAN

1129

R

OUTER

(PIM S

PARSE

) C

ONFIGURATION

C

OMMAND

S

ET

To activate the Router (PIM Sparse) Configuration mode, enter the router pim-sparse command at the
Global Configuration mode prompt. For example:

>enable
#configure terminal
(config)#router pim-sparse
(config-pim-sparse)#

The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:

cross-connect <#>

on page 28

do

on page 32

end

on page 33

exit

on page 34

All other commands for this command set are described in this section in alphabetical order.

join-prune-msg-interval

on page 1130

rp-address access-group

on page 1131

spt-threshold infinity

on page 1133