Hardware-address Page 1152
Page 1152
Command Reference Guide
DHCP Pool Command Set
61200990L1-35E
Copyright © 2005 ADTRAN
1152
hardware-address
Use the hardware-address command to specify the name of a Dynamic Host Configuration Protocol
(DHCP) client. Use the no form of this command to remove the configured client name.
Syntax Description
Specifies the hardware address (in hexadecimal notation with colon delimiters) of
the preferred router on the client’s subnet (example d2:17:04:91:11:50).
Optional. Specifies the hardware protocol of the DHCP client.
The hardware type field can be entered as follows:
ethernet
Specifies standard Ethernet networks.
ieee802
Specifies IEEE 802 standard networks.
<1-21>
Enter one of the hardware types listed in RFC1700.
The valid hardware types are as follows:
1
10 Mb Ethernet
2
Experimental 3 Mb Ethernet
3
Amateur Radio AX.25
4
Proteon ProNET Token Ring
5
Chaos
6
IEEE 802 Networks
7
ARCNET
8
Hyperchannel
9
Lanstar
10
Autonet Short Address
11
LocalTalk
12
LocalNet (IBM PCNet or SYTEK LocalNet)
13
Ultra link
14
SMDS
15
Frame Relay
16
Asynchronous Transmission Mode (ATM)
17
HDLC
18
Fibre Channel
19
Asynchronous Transmission Mode (ATM)
20
Serial Line
21
Asynchronous Transmission Mode (ATM)