ADTRAN 5000 Series - Manual (Page 432)

Command Reference Guide Global Configuration Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 432
mac address-table static bridge interface
Use the mac address-table static command to insert a static MAC address entry into the bridge
forwarding table. Use the no form of this command to remove an entry from the table.
Syntax Description
Specifies a valid 48-bit MAC address.
Specifies a valid bridge interface ID.
interface Specifies the interface. Type mac address-table static bridge interface ? for a
complete list of valid interfaces.
Specifies a valid slot/port interface ID.
Default Values
By default, there are no static entries configured.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example adds a static MAC address to PPP 1 on bridge 4:
(config)#mac address-table static 00:A0:C8:00:00:01 bridge 4 interface ppp 1