ADTRAN 5000 Series - Manual (Page 1068)

Command Reference Guide IKE Policy Attributes Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1068
authentication [dss-sig | pre-share | rsa-sig]
Use the authentication command to configure this IKE policy’s use of pre-shared secrets and signed
certificates during IKE negotiation.
Syntax Description
dss-sig Specifies to use DSS-signed certificates during IKE negotiation to validate the peer.
pre-share Specifies the use of pre-shared secrets during IKE negotiation to validate the peer.
rsa-sig Specifies to use RSA-signed certificates during IKE negotiation to validate the peer.
Default Values
By default, this command is enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series units.
Command History
Release 4.1 Command was introduced.
Release 5.1 Command was expanded to include signed certificates.
Functional Notes
Both sides must share the same pre-shared secret in order for the negotiation to be successful.
Usage Example
The following example enables preshared secrets for this IKE policy:
(config-ike)#attribute 10
(config-ike-attribute)#authentication pre-share