ADTRAN 5000 Series - Manual (Page 622)

Command Reference Guide T3 Interface Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 622
coding [b3zs]
Use the coding command to configure the line coding for a T3 physical interface. This setting must match
the line coding supplied on the circuit by the service provider.
Syntax Description
b3zs Configures the line coding for bipolar three zero substitution (B3ZS).
Default Value
By default, all T3 interfaces are configured with B3ZS line coding.
Applicable Platforms
This command applies to the NetVanta 5000 Series.
Command History
Release 6.1 Command was introduced.
Functional Notes
The line coding configured in the unit must match the line coding of the T3 circuit. A mismatch will result in
line errors (e.g., BPVs).
Usage Example
The following example configures the T1 interface for B3ZS line coding:
(config)#interface t3 1/1
(config-t3 1/1)#coding b3zs