Spt-threshold infinity – ADTRAN 5000 Series User Manual

Page 1133

Command Reference Guide

Router (PIM Sparse) Configuration Command Set

61200990L1-35E

1133

spt-threshold infinity

Use the spt-threshold command to change the PIM Sparse Shortest Path Tree (SPT) threshold, which
specifies the number of packets the router sends using the rendezvous point (RP) before switching to the
SPT.

Syntax Description

Specifies the number of packets the routing switch sends using the RP
before switching to the SPT. Valid range: 1 to 4294967295.

infinity

Causes all sources to use the shared RP tree.

Default Values

By default, the SPT threshold is set to 1 packet.

Applicable Platforms

This command applies to the NetVanta 2000 and 5000 and the Total Access 900 Series units.

Command History

Release 11.1

Command was introduced.

Usage Examples

The following example sets the SPT threshold at five packets:

(config)#router pim-sparse

(config-pim-sparse)#spt-threshold 5