ADTRAN 5000 Series - Manual (Page 1162)

Command Reference Guide DHCP Pool Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1162
timezone-offset
Use the timezone-offset command to specify the timezone adjustment (in hours) published to the client.
Syntax Description
Specifies the timezone adjustment (in hours) published to the client. Use an
integer from -12 to 12.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following example sets the timezone adjustment for the client to -3 hours. For example, if the server
time is configured for eastern time and the client is configured for Pacific time, you can set the client
timezone adjustment to -3 hours:
(config)#ip dhcp pool MyPool
(config-dhcp)#timezone-offset -3