ADTRAN 5000 Series - Manual (Page 258)

Command Reference Guide Enable Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 258
show sip location [dynamic | static]
Use the show sip location command to display Session Initiation Protocol (SIP) statistical and registration
information.
Syntax Description
dynamic Displays SIP location database dynamic entries.
static Displays SIP location database static entries.
Default Values
No default necessary for this command.
Applicable Platforms
This command applies to the Total Access 2000 and 5000 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example shows sample output from the show sip location static command:
>enable
#show sip location static
User IP Address Port Expires Source
----------------------------------------------------------------------------------------------
Test 10.1.1.1 5060 0 User Config