ADTRAN 5000 Series User Manual
Page 287
Command Reference Guide
Global Configuration Mode Command Set
61200990L1-35E
Copyright © 2005 ADTRAN
287
aaa authentication [banner | fail-message | password-prompt |
username-prompt]
Use the aaa authentication command to control various features of the AAA subsystem authentication
process. For more detailed information on AAA functionality, refer to the Technology Review section of
the command aaa on
.
Syntax Description
banner
Sets the banner shown before user authentication is attempted. The banner can
be multiple lines.
fail-message
Sets the message shown if user authentication fails. The message can be multiple
lines.
password-prompt
Sets the prompt for the user's password. The prompt is a single line. Enclose the
string in quotation marks.
username-prompt
Sets the prompt for the user's name. The prompt is a single line. Enclose the
string in quotation marks.
Default Values
banner
User Access Verification
fail-message
Authentication Failed
password-prompt
Password:
username-prompt
Username:
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1
Command was introduced.
Usage Examples
The following is a typical example of customizing the AAA authentication process:
(config)# aaa authentication banner #
Enter TEXT message. End with the character '#'.
User login authentication:#
(config)#
(config)#aaa authentication fail-message #