ADTRAN 5000 Series - Manual (Page 304)

Command Reference Guide Global Configuration Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 304
bridge protocol ieee
The bridge protocol ieee command configures a bridge group for the IEEE Spanning-Tree Protocol. Use
the no form of this command (with the appropriate arguments) to delete this setting.
Syntax Description
Specifies a bridge group number (range: 1 to 255).
ieee Specifies IEEE 802.1 Ethernet spanning-tree protocol.
Default Values
By default, all configured bridge interfaces implement ieee spanning-tree protocol.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example deletes the bridge protocol setting for bridge-group 17:
(config)#no bridge 17 protocol ieee