ADTRAN 5000 Series - Manual (Page 490)

Command Reference Guide Line (SSH) Interface Config Command Set
61200990L1-35E Copyright © 2005 ADTRAN 490
login local-userlist
Use the login local-userlist command to check the local list of usernames and passwords configured using
the username/password Global Configuration command (see username password
on page 469 ). Use the no form of this command to disable the login local-userlist feature.
Syntax Description
No subcommands.
Default Values
By default, there is no login password set for access to the unit.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example creates a local userlist and enables the security login feature:
(config)#username my_user password my_password
(config)#line ssh 0
(config-ssh0)#login local-userlist
When connecting to the unit, the following prompts are displayed:
User Access Login
Username: my_user
Password:
#
All user properties assigned using the username/password command are valid when using
the login local-userlist command.