beautypg.com

Traceroute

Page 25

background image

Command Reference Guide

Basic Mode Command Set

61200990L1-35E

Copyright © 2005 ADTRAN

25

traceroute

Use the traceroute command to display the Internet Protocol (IP) routes a packet takes to reach the
specified destination.

Syntax Description

Specifies the IP address of the remote system to trace the routes to.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.

Command History

Release 1.1

Command was introduced.

Usage Examples

The following example performs a traceroute on the IP address 192.168.0.1:

#traceroute 192.168.0.1

Type CTRL+C to abort.

Tracing route to 192.168.0.1 over a maximum of 30 hops

1 22ms 20ms 20ms 192.168.0.65

2 23ms 20ms 20ms 192.168.0.1

#