ADTRAN 5000 Series - Manual (Page 1052)

Command Reference Guide Crypto Map Manual Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1052
C RYPTO M AP M ANUAL C OMMAND S ET
To activate the Crypto Map Manual mode, enter a valid version of the crypto map ipsec-manual
command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#crypto map Map-Name 10 ipsec-manual
(config-crypto-map)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
description on page 31
cross-connect <#>
on page 28
do on page 32
end on page 33
exit on page 34
All other commands for this command set are described in this section in alphabetical order.
antireplay on page 1053
ike-policy on page 1054
match address on page 1055
set peer on page 1057
set session-key [inbound | outbound] on page 1058
set transform-set on page 1062
For VPN configuration example scripts, refer to the technical support note
Configuring VPN located on the ADTRAN OS Documentation CD provided with your
unit.