Dial-backup priority Page 732
Page 732
Command Reference Guide
Frame Relay Sub-Interface Config Command Set
61200990L1-35E
Copyright © 2005 ADTRAN
732
dial-backup priority
Use the dial-backup priority command to select the backup priority for this interface. This command
allows the user to establish the highest priority backup link and ensure that link will override backups
attempted by lower priority links. Use the no form of this command to return to the default value. For more
detailed information on Frame Relay dial-backup functionality, refer to the Functional Notes and
Technology Review sections of the command dial-backup call-mode [answer | answer-always | originate |
originate-answer | originate-answer-always]
.
Syntax Description
Sets the relative priority of this link (valid range: 0 to 100). A value of 100
designates the highest priority.
Default Values
By default, dial-backup priority is set to 50.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Command was introduced.
Usage Examples
The following example assigns the highest priority to this endpoint:
(config)#interface frame-relay 1.16
(config-fr 1.16)#dial-backup priority 100