beautypg.com

Mac address-table aging-time

Page 431

background image

Command Reference Guide

Global Configuration Mode Command Set

61200990L1-35E

Copyright © 2005 ADTRAN

431

mac address-table aging-time

Use the mac address-table aging-time command to set the length of time dynamic MAC addresses
remain in the switch or bridge forwarding table. Use the no form of this command to reset this length to its
default.

Syntax Description

Set an aging time (in seconds) from 10 to 1,000,000. Set to 0 to disable the
timeout.

Default Values

By default, the aging time is 300 seconds.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900
Series units.

Command History

Release 5.1

Command was introduced.

Usage Examples

The following example sets the aging time to 10 minutes:

(config)#mac address-table aging-time 600