ADTRAN 5000 Series - Manual (Page 958)

Command Reference Guide PPP Interface Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 958
ppp chap password
Use the ppp chap password command to configure an alternate password when the peer requires CHAP
PPP authentication. Use the no form of this command to remove a configured password. For more
information on PAP and CHAP functionality, refer to the Technology Review section for the command ppp
authentication [chap | pap]
on page 952 .
Syntax Description
Specifies a password using an alphanumeric string up to 80 characters in length.
Default Values
By default, there is no defined PPP CHAP password.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example specifies a PPP CHAP password of my_password:
(config)#interface ppp 1
(config-ppp 1)#ppp chap password my_password