ADTRAN 5000 Series User Manual
Page 284
Command Reference Guide
Global Configuration Mode Command Set
61200990L1-35E
Copyright © 2005 ADTRAN
284
aaa accounting commands
stop-only] [group
Use aaa accounting commands to set parameters for AAA accounting. For more detailed information on
AAA functionality, refer to the Technology Review section of the command aaa on
.
Syntax Description
Specifies the commands enable level. (1=unprivileged, 15 = privileged).
Specifies the name of the list.
default
Uses the default accounting list.
none
Disables accounting.
stop-only
Records stop-only when service terminates.
group
Uses the specified group of remote servers for accounting.
group tacacs+
Uses the TACACS+ server for accounting.
Default Values
By default, accounting is not enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example creates a list called myList and sets accounting for Level 1 commands at stop-only
activities:
(config)#aaa accounting commands 1 myList stop-only group tacacs+
To complete this command, Telnet must be applied to the lines. See Line (Telnet) Interface
Config Command Set
for more detailed instructions.