ADTRAN 5000 Series - Manual (Page 1039)

Command Reference Guide Certificate Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1039
C ERTIFICATE C ONFIGURATION C OMMAND S ET
To activate the Certificate Configuration mode, enter the crypto ca certificate chain command at the
Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#crypto ca certificate chain MyProfile
(config-cert-chain)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect <#>
on page 28
do on page 32
end on page 33
exit on page 34
All other commands for this command set are described in this section in alphabetical order.
certificate on page 1040
certificate ca on page 1041
crl on page 1042