ADTRAN 5000 Series - Manual (Page 1119)

Command Reference Guide Router (OSPF) Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1119
default-information-originate [always | metric | metric-type
]
Use the default-information-originate command to cause an ASBR to generate a default route. It must
have its own default route before it generates one unless the always keyword is used.
Syntax Description
always Optional. Specifies to always advertise default route.
metric Optional. Configures the metric value (range is 0 to 16,777,214).
metric type Optional. Configures the metric type (1 or 2).
Default Values
metric 10
metric type 2
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following example configures a router to always advertise default routes and assigns the default router
a metric value of 10000 and a metric type of 2:
(config)#router ospf
(config-ospf)#default-information-originate always metric 10000 metric-type 2