ADTRAN 5000 Series - Manual (Page 134)

Command Reference Guide Enable Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 134
debug sip [cldu | location | manager | registrar |
registration ]
Use the debug sip command to activate debug messages associated with Session Initiation Protocol (SIP)
events. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages.
Syntax Description
location Activates SIP location database event debug messages.
manager Activates SIP stack manager event debug messages.
proxy Activates SIP stack proxy event debug messages.
Specifies a specific subsource.
registrar Activates SIP registrar event debug messages.
Specifies a specific extension.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 2000 and 5000 Series units.
Command History
Release 9.3 Command was introduced.
Usage Examples
The following example activates all debug messages associated with SIP stack manager events:
>enable
#debug sip stack manager