Conducting a lamp test – Edwards Signaling eFSA250 User Manual
Page 212
Chapter 5: Diagnostics, maintenance, and testing
200
E-FSA64 and E-FSA250 Technical Reference Manual
The test message is sent to the CMS account that
you selected. For verification of the CMS account
receiving the test message, you must be in contact
with the CMS account during the test. Nothing is
displayed on the LCD.
7. Press Cancel to return to the previous menu.
— or —
Press the Menu button to exit menu mode.
Enter Password
0000
Dialer
Account 1
Account 2
Conducting a lamp test
A lamp test lights all of the LEDs on the panel and the LED annunciator and tests
the LCD so that you can verify proper operation. LEDs stay on for 15 seconds.
To conduct a lamp test:
1. Press the Lamp Test button on the front panel.
2. Verify that the LCD, all LEDs on the panel, and LED annunciators (if used)
work properly.
Figure 55: Lamp test button
00:00:00 01/01/07
,