Edwards Signaling eFSA250 - Manual (Page 167)

Chapter 3: System operation
E-FSA64 and E-FSA250 Technical Reference Manual 155
ID Event description
020 System startup: The control panel is
starting up
021 Program mode: The control panel is in
program mode
022 Reset: The control panel is resetting
023 Reset/Sil inhibit: Reset/silence inhibit is
activated
024 Panel silence: The control panel buzzer
was silenced
025 Signal silence: The control panel NACs
have been silenced
026 Drill: The control panel is in the drill
state
027 Walk test: The control panel is in the
walk test state
028 Test fire: A smoke or heat detector is
being tested
029 Clear history: The control panel’s event
history was cleared
030 Time: The control panel’s time was
modified
ID Event description
031 Date: The control panel’s date was
modified
032 Common disable: A disable event is
taking place on the control panel
033 Common trouble: A trouble event is
taking place on the control panel
034 Ground fault: The panel detected a
ground fault
035 Battery charger: The panel detected a
battery charger trouble condition. The
charger may not be able to charge the
batteries.
036 Battery low: The batteries are low on
charge
037 Battery missing: The battery is no
longer connected
038 AC power: There is a problem with the
panel’s AC power
039 Aux. power 1: The control panel
detected a trouble condition on the
continuous AUX power circuit 1
040 Aux. power 2: The control panel
detected a trouble condition on the
resettable AUX power circuit 2
041 System AC power: There is a problem
with the panel’s AC power and/or a
remote auxiliary/booster’s AC power