Edwards Signaling eFSA250 - Manual (Page 183)

Chapter 3: System operation
E-FSA64 and E-FSA250 Technical Reference Manual 171
To disable or enable a zone:
1. Press the Menu button and choose Control.
2. Enter a level one password.
3. Choose Enable/Disable.
4. Choose Zone.
5. Select the zone that you want to disable or enable.
6. Press Enter.
7. If devices in the zone are active, acknowledge the
warning message by selecting Continue to disable
the zone or Cancel to exit.
The zone is disabled.
8. Press Cancel to return to the previous menu.
— or —
Press the Menu button to exit menu mode.
Main Menu
Reports
Test
Control
Program

Enter Password
0000

Control
Enable/Disable
Activate/Restore

Enable/Disable
Device
Zone
Panel Event

Zone Disable<>
01
Zone 01

Warning Device Active
Continue?
Cancel?