Edwards Signaling eFSA250 - Manual (Page 168)

Chapter 3: System operation
156 E-FSA64 and E-FSA250 Technical Reference Manual
ID Event description
042 Common alarm: An alarm event is
taking place on the control panel
043 Common supervisory: A supervisory
event is taking place on the control
panel
044 Common monitor: A monitor event is
taking place on the control panel
045 Common trouble for telco dialer: A
trouble event, other than a DACT
delivery fault is taking place on the
control panel
046 Common trouble for network dialer: A
trouble event, including a DACT delivery
fault is taking place on the control panel
047 Outputs Are Latched: Outputs in the
system are in latched condition
048 Self test fault: A fault was detected
while testing the panel’s internal
subsystems (memory, flash, code, etc.)
049 Internal fault: The control panel
detected an internal hardware or
software error
050 Dialer dsbl/rem disc: The dialer was
disabled by the Remote Disconnect
button
051 Dialer line 1 fault: A ground fault or line
fault was detected on line 1 of the dialer
052 Dialer line 2 fault: A ground fault or line
fault was detected on line 2 of the dialer
ID Event description
053 Dialer delivery fail: The dialer failed to
deliver a message to the receiver or
CMS
054 Dialer normal test: A dialer test was
conducted when the panel was in a
normal state
055 Dialer abnormal test: A dialer test was
conducted when the panel was in an
off-normal state
056 Dialer configuration: The dialer is not
programmed or has unverified changes
057 Net Comm Fault 01: Communications
between the panel and network receiver
01 failed
058 Net Comm Fault 02: Communications
between the panel and network receiver
02 failed
059 Net Comm Fault 03: Communications
between the panel and network receiver
03 failed
060 Net Comm Fault 04: Communications
between the panel and network receiver
04 failed
061 Net Comm Fault 05: Communications
between the panel and network receiver
05 failed
062 Net Comm Fault 06: Communications
between the panel and network receiver
06 failed
063 Net Comm Fault 07: Communications
between the panel and network receiver
07 failed