Rockwell Automation 1426 PowerMonitor 5000 Unit - Manual (Page 71)

Rockwell Automation Publication 1426-UM001F-EN-P - November 2013 71
Metering Chapter 4
You can use the Web interface to view power quality results, power monitor
status and statistics, and configuration. CalibrationData links to a printable
calibration certificate for the power monitor. Configuration lets you review the
configuration parameters, and, if logged in as an administrator, change them.
While logged in as an administrator, you can also issue commands to the power
monitor from the Command link.
Viewing Metering Results with a Door Mounted Display
The PowerMonitor 5000 Display Module (catalog number 1426-DM, purchased
separately) can be applied as a panel display for one, two, or three PowerMonitor
5000 units.
Appendix C provides further information on setting up and using a Display
Module for a PowerMonitor 5000 unit.
Configuration Lock Unauthorized changes to the PowerMonitor 5000 unit setup are prevented when
the configuration lock switch is placed in the lock position.
Applications
This applies to all models.
Operation
The following setup parameters and commands are locked when the
configuration lock is applied.
Configuration.Metering_Basic
All parameters.
Configuration.SystemGeneral
• KYZ and Relay Outputs setup
• Status inputs scale
Configuration.CommunicationsNative
• Network demand setup