Rockwell Automation 1426 PowerMonitor 5000 Unit - Manual (Page 50)

50 Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
Chapter 3 Setup
Note that only the USB Web interface can be used to enable, disable, or reset
security. If security accounts are lost or forgotten, you need to connect to the
USB Web interface and log in with the usbadmin account to create new network
security accounts.
Setting Up Remaining Functions of the PowerMonitor 5000 Unit
The remaining functions are set up in the same way as the examples discussed in
this section. This manual lists configuration parameters and options for basic
metering, communication, and other functions and features of the
PowerMonitor 5000 unit in these chapters:
• Metering on page 51
• Power Quality Monitoring on page 73
• Logging on page 99
• Logic Functions on page 151
• Other Functions on page 171
Setup Using Optional
Software FactoryTalk EnergyMetrix software, with the RT option, provides a
configuration interface for the PowerMonitor 5000 unit, including the ability to
upload, edit, download, and back up the unit configuration on a server. Please
refer to the FactoryTalk EnergyMetrix User Manual, publication
FTALK-UM001 , or online help topics for information on configuring the
PowerMonitor 5000 unit by using FactoryTalk EnergyMetrix software. Contact
your local Rockwell Automation sales office or Allen-Bradley distributor, or visit
http://www.software.rockwell.com for more information on available software
packages.
Setup Using Communication Refer to Communication on page 181 for detailed information on unit setup by
using communication with a programmable controller or custom software
application.