Rockwell Automation 1426 PowerMonitor 5000 Unit - Manual (Page 369)

Rockwell Automation Publication 1426-UM001F-EN-P - November 2013 369
Technical Specifications Appendix B
Certifications The PowerMonitor 5000 unit adheres to the following certifications and
approvals.
UL/CUL
UL 61010 listed, File E345550, for Measuring, Testing and Signal-generation
Equipment and CUL Certified.
CE Certification
If this product bears the CE marking, it is approved for installation within the
European Union and EEA regions. It has been designed to meet the following
directives.
Table 195 - General Specifications
Parameter Maximum Rating
Voltage Terminal Blocks 18…14 AWG (0.75…2.5 mm 2 ), 75 °C Minimum Copper
Wire only Recommended torque 1.5 N•m (13.3 lb•in)
Current Sensing Input 12 AWG (4 mm 2 ), 75 °C Minimum Copper Wire only
Recommended torque: N/A
Control Power Terminal Block 22…14 AWG (0.25…2.5 mm 2 ), 75 °C Minimum Copper
Wire only Recommended torque 0.63 N•m (5.6 lb•in)
Input/Output (I/O) Terminal Block 20…14 AWG (0.5…2.5 mm 2 ), 75 °C Minimum Copper
Wire only Recommended torque 0.63 N•m (5.6 lb•in)
Temperature, Operating -20…70 °C (4…158 °F)
Temperature, Storage -40…85 °C (-40…185 °F)
Humidity 5…95%, Noncondensing
Vibration 2 g
Shock, Operating 30 g
Shock, Nonoperating 50 g
Dielectric Withstand UL61010, EN61010
Installation Location Indoor use only
Altitude Max 2000 m (6560 ft.)