Rockwell Automation 1426 PowerMonitor 5000 Unit - Manual (Page 147)

Rockwell Automation Publication 1426-UM001F-EN-P - November 2013 147
Logging Chapter 6
3. Read the trigger data setpoint information file name from the
LoggingResults. TriggerLog_Setpoint_Info_File_Name (M6 model) table
one or more times until the desired file name is returned.
4. Read the trigger data file name from the
LoggingResults.TriggerLog_FileName Data Table one or more times until
the desired file name is returned.
5. Write the selected file names into the Configuration.TriggerDataLogFile
(M6 Model) and Configuration.TriggerSetpointInfoFile (M6 model)
tables.
6. Perform a read of the LoggingResults.TriggerData_Header (M6 model)
table and store the results in a suitable location.
7. Perform sequential reads of the LoggingResults.TriggerData_Log (M6
model) table and store the results in a suitable location.
The first read returns the total number of cycle data records in the log
along with the selected parameter ID numbers. Subsequent reads return
each the value of the selected parameters, cycle-by-cycle.
Commands
• Clear trigger data log (Command Word 2 = 13)