Allied Telesis AT-S97 - Manual (Page 99)

AT-S85 and AT-S97 Management Software User’s Guide
99
SYSTEM SHOW CHASSIS
Syntax
system show chassis id= chassis
Parameters
chassis Identifies a chassis ID number. The range is 0 to
31. For background information, refer to
“Chassis ID Numbers” on page 25.
To view the ID number of a unit, use the SYSTEM SHOW
CLUSTER command. For instructions, refer to “SYSTEM
SHOW CLUSTER” on page 101.
Privilege Levels
Administrator, read-write and read-only.
Description
This command is used to display the model names and slot assignments
of the management module and the media converter modules in a chassis.
It is also used to view a chassis’ module name and MAC address.
You can view just one chassis at a time with this command. To view all of
the chassis of a stack with one command, use the SYSTEM SHOW
CLUSTER command, as explained in “SYSTEM SHOW CLUSTER” on
page 101.
An example of the information is shown in Figure 12.
Figure 12. SYSTEM SHOW CHASSIS Command
Chassis Chassis Chassis MAC Master
ID Name Type Address Chassis
------------------------------------------------------------------
0 AT-MCF2000 11:22:33:44:55:55 Yes
Slot ID Module Name Module Type Cfg Overwrite Software Version
---------------------------------------------------------------------
M AT-MCF2000M v3.0.0
1 AT-MCF2012LC Disable v3.0.0
2 AT-MCF2012LC Disable v3.0.0
A AT-MCF2KFAN - -
B AT-MCF2000AC - -