Allied Telesis AT-S97 - Manual (Page 63)

AT-S85 and AT-S97 Management Software User’s Guide
63
SYSTEM SET CONTACT
Syntax
system set contact= contact
Parameter
contact Specifies the name of the network administrator who has
the responsibility of maintaining the chassis. The contact
can be up to 25 alphanumeric characters. Spaces are
allowed, but names with spaces must be enclosed in
double quotes (“ “). To remove the current value without
specifying a new value, enter “none.”
Privilege Levels
Administrator and read-write.
Description
This command is used to set the name of the network administrator who is
responsible for managing the chassis. To view this parameter’s current
value, refer to “SYSTEM SHOW INFO” on page 69.
Example
This command sets the chassis’ contact to “Jane Smith:”
system set contact="Jane Smith"