Allied Telesis AT-S97 - Manual (Page 137)

AT-S85 and AT-S97 Management Software User’s Guide
137
When the status is Disable, the management module cannot send
events to a syslog server. To set this parameter, refer to “LOGGING
ENABLE SYSLOG” on page 132 and “LOGGING DISABLE SYSLOG”
on page 130.
ˆ Server - The IP address of the syslog server. To set this value, refer to
“LOGGING SET EVENTLOG” on page 133.
ˆ Facility Code - The facility level added to the event messages as they
are sent to a syslog server. To set this value, refer to “LOGGING SET
EVENTLOG” on page 133.
Example
This command displays the status of the event log and the syslog client:
logging show