Allied Telesis AT-S97 - Manual (Page 117)

117
Chapter 6
Network Time Protocol Commands
This chapter contains the following sections:
ˆ “Overview” on page 118
ˆ “NTP DISABLE” on page 120
ˆ “NTP ENABLE” on page 121
ˆ “NTP SET” on page 122
ˆ “NTP SHOW” on page 123
Note
Remember to save your parameter changes in the active master
configuration file with the CONFIG SAVE command. For information,
refer to “Saving Your Configuration Changes” on page 23 or Chapter
8, “Configuration File Commands” on page 145.