Allied Telesis AT-S97 - Manual (Page 176)

Chapter 9: File System Commands
176
FILE DELETE
Syntax
file delete filesystem=system:// chassis / slot / filename .cfg
Parameter
system Specifies the location of the file to delete. This parameter
has the following parts:
chassis Specifies an ID number of a chassis. The
range is 0 to 31. For background
information, refer to “Chassis ID Numbers”
on page 25.
slot Identifies a slot with a module containing the
file. For background information, refer to
“Slot Numbers and Letters” on page 26.
Possible values are:
m Identifies the AT-MCF2000M
Management Module.
1 or 2 Specifies a slot number of a
media converter module in the
AT-MCF2000 Chassis. The left
slot is 1 and the right slot is 2.
1 to 4 Specifies a slot number of a
media converter module in the
AT-MCF2300 Chassis. The slots
are number 1 (left) and 2 (right)
in the top row, and 3 (left) and 4
(right) in the bottom row.
filename.cfg Specifies the name of the configuration file
to delete. The filename is case sensitive and
must be enclosed in double quotes if it
contains a space. The asterisk (*) can be
used as a wildcard to delete files with similar
names.
To view the ID and slot numbers of a chassis, refer to
“SYSTEM SHOW CHASSIS” on page 99 or “SYSTEM
SHOW CLUSTER” on page 101. To view the filenames in
the file system on a module, refer to “FILE SHOW” on
page 191.