Allied Telesis AT-S97 - Manual (Page 180)

Chapter 9: File System Commands
180
slot Identifies the slot number of a module. The
possible values are:
* (asterisk) Indicates all of the slots in a
chassis.
m Identifies the management
module slot.
1 or 2 Specifies a slot number of a
media converter module in the
AT-MCF2000 Chassis. The left
slot is 1 and the right slot is 2.
1 to 4 Specifies a slot number of a
media converter module in the
AT-MCF2300 Chassis. The slots
are number 1 (left) and 2 (right)
in the top row, and 3 (left) and 4
(right) in the bottom row.
bootblock Designates the area of flash memory
reserved for the AT-S85 and AT-S97 boot
loader files.
appblock Designates the area of flash memory
reserved for the AT-S85 and AT-S97
Management Software.
filename.cfg Specifies a name for a master configuration
file. The file is assigned this name when it is
stored in the file system in a management
module after being downloaded from a
TFTP server. The name can be up to 15
alphanumeric characters, not including the
extension. Names with spaces are
permitted, but must be enclosed in double
quotes. The filename must include the
“.CFG” extension.
To view the ID and slot numbers of a chassis, refer to
“SYSTEM SHOW CHASSIS” on page 99 or “SYSTEM
SHOW CLUSTER” on page 101.
Privilege Levels
Administrator and read-write.