Allied Telesis AT-S97 - Manual (Page 164)

Chapter 8: Configuration File Commands
164
CONFIG SET
Syntax
config set filesystem=system:// chassis / slot / filename .cfg
Parameter
filesystem Specifies a location and a name of a master configuration
file. This parameter consists of the following parts:
chassis Specifies an ID number of a chassis with a
management module. The ID number is
either 0 or 31.
slot Identifies a slot with a management module.
The only supported value for the slot is:
m Identifies the management
module slot and the
AT-MCF2000M Management
Module.
filename.cfg Specifies the name of a active master
configuration file. The filename must include
the “.CFG” extension and is case sensitive.
To view the filenames of the configuration
files in a file system on a management
module, refer to “FILE SHOW” on page 191.
If the filename has spaces, enclose it in
double quotes (“ “).
To view the ID and slot numbers of a chassis, refer to
“SYSTEM SHOW CHASSIS” on page 99 or “SYSTEM
SHOW CLUSTER” on page 101.
Privilege Levels
Administrator and read-write.
Description
This command designates the active master configuration file on the
management module. For an explanation of the master configuration file,
refer to “Overview” on page 146.