Allied Telesis AT-S97 - Manual (Page 179)

AT-S85 and AT-S97 Management Software User’s Guide
179
FILE DOWNLOAD
Syntax 1: Downloading the AT-S85 and AT-S97 Boot Loaders
file download srcfile=tftp:// ipaddress / filename .bin
dstfile=system:// chassis / slot /bootblock
Syntax 2: Downloading the AT-S85 and AT-S97 Management
Software (Image Files)
file download srcfile=tftp:// ipaddress / filename .img
dstfile=system:// chassis / slot /appblock
Syntax 3: Downloading Master Configuration Files
file download srcfile=tftp:// ipaddress / filename .cfg
dstfile=system:// chassis / slot / filename .cfg
Syntax 4: Downloading Configuration Files from a Management
Module to a Media Converter Module
file download srcfile=system:// chassis /m/ filename .cfg
dstfile=system:// chassis / slot / filename .cfg
Parameters
srcfile=tftp Specifies the IP address of the TFTP server and the name
of the file to download to a module. This parameter has the
following parts:
ipaddress Specifies an IP address of a TFTP server.
filename Specifies the name of the file on the TFTP
server to download onto the management
module or the media converter module.
Filenames with spaces must be enclosed in
double quotes. The filename extension must
be “.BIN” for the boot loader, “.IMG” for the
management software, and “.CFG” for a
configuration file.
dstfile=system
Specifies the destination chassis and module for the file.
This parameter has the following parts:
chassis Specifies an ID number of a chassis. The
range is 0 to 31. To indicate all of the
chassis in a stack, enter an asterisk (*). For
background information, refer to “Chassis ID
Numbers” on page 25.